Samson Media 6, Монтаж и эксплуатация, Страница: 6 / 42

6
EB 9527-3 EN
Firmware changes
Table 1 · Firmware versions
Changes of the device's firmware compared to previous version
Old New
A 2.03/B 2.03 A 2.10/B 2.10
Limit switches
Limit switches A1 and A2 are preset by the software to function as either
min or max alarms. They can be configured separately using the keys.
Filling limit during
operation
(UCW)
Filling limit during operation can be adjusted on the operating keys re-
gardless of the limit switches.
A 2.10/B 2.10 A 2.11/B 2.11
Error code Current output of Media 6 is set to
≤
3.6 mA.
A2.11/B2.11 V3.02
LCD
Use the and keys to switch the LCD on or off (“LCD ON” or
“LCD OFF”).
Gas and medium code Gas and medium code with up to 8 characters
Error code
Error code changed. Changed response when confirming errors. Device
errors are logged in error history (refer to page 27).
Operating mode New operating modes: counting flow rate; differential pressure
Units for flow rate Flow rate displayed in “.../h” or “.../min”
Units for static pressure
(PTANK)
The following units were added: mbar, bar, kPa, psi, mmH
2
0, cmH
2
0,
mH
2
0, inH
2
0.
DP0 value Pressure for 4 mA signal
Display “LOAD”
Replaced by display of version no. ”V3.02”
V3.02 V3.03
Display mode "Counting flow rate" operating mode:
Standard display shows meter reading.