Samson FOUNDATION 3730-5, Монтаж и эксплуатация

Страница: 67 / 132

EB 8384-5 EN 67
Start-up and settings
Closed position AIR TO CLOSE
If the slide switch is set to AIR TO CLOSE, the
positioner automatically switches to the di-
rection of action increasing/decreasing (
äæ
)
after initialization has been completed. This
results in the following assignment between
set point and valve position:
Closed position
Direction of
action
Set point
Valve
CLOSED
at
OPEN at
Actuator stem
extends (FA)
AIR TO OPEN

0 % 100 %
Actuator stem
retracts (FE)
AIR TO CLOSE

100 % 0 %
The tight-closing function has been activated.
Set Code 15 (final position w>) to 99 % for
three-way valves.
Canceling an initialization process
An initialization procedure in progress can
be canceled by pressing the rotary pushbut-
ton ( ).
STOP appears for three seconds on
the display and the positioner then changes
to the fail-safe position.
Exit the fail-safe position again over Code 0
(see section 8.2.2).
7.6.1 MAX – Initialization
based on maximum
range
The positioner determines travel/angle of ro-
tation of the closing member from the
CLOSED position to the opposite travel stop
and adopts this travel/angle of rotation as
the operating range from 0 to 100 %.
Enable configuration:
Note:
If no settings are entered within 120
seconds, the enabled configuration
function becomes invalid.
Default: No
Turn
g
Code 3, display: No
Press , Code 3 blinks.
Turn

YES
Press , display:
Select the initialization mode:
Default MAX
Turn

Code 6
Press .
Turn

MAX
