manualshive.com logo in svg

Samson 42-10, Монтаж и эксплуатация

Поделиться
Скачать
Samson 42-10 Скачать руководство пользователя страница 30

5-2 

 

EB 3009 EN

Installation

Support or suspension

The plant engineering company is responsi-
ble for selecting and implementing a suitable 
support or suspension of the installed regula-
tor and the pipeline.

Depending on the regulator version and 
mounting position, the valve, actuator and 
pipeline must be supported or suspended.

Do not attach supports directly to the valve 
or actuator.

Compensation chamber

A compensation chamber (19) is required 

for liquids above 150 °C as well as for 

steam.
The mounting position of the compensation 
chamber is indicated by an adhesive label 
on the chamber itself as well as by an arrow 
and the word "top" stamped on the top of 
the chamber.

This mounting position must be adhered to; 

otherwise the safe functioning of the regula-
tor cannot be guaranteed.

Note

NOTICE

!

Mounting position with the 

actuator suspended

All versions.

Mounting position with the 

actuator upright on top

All versions.

Mounting position, 

sideways

Only after consulting 

SAMSON

Fig. 5-1: 

Schematic drawing of mounting 

position

Содержание 42-10













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды