Samson 3969, Монтаж и эксплуатация

Страница: 30 / 48

30 EB 3969 EN
Mounting and start-up
5.1.2 Rotary actuators
according to VDI/
VDE 3845
Required mounting parts and accessories:
see section 3.1.
If the solenoid valve is configured for attach
-
ment to rotary actuators according to VDI/
VDE 3845, no additional mounting parts are
required.
1. Check the location of the formed seal or
O-rings on the NAMUR interface and
that of the coded screw.
2. Use two cap screws to fasten the sole-
noid valve on to the rotary actuator.
The solenoid valve can be configured with
an external connecting plate to facilitate ser-
vicing work, device replacement or intercon-
nection with other devices for exhaust air
feedback (see section 5.2.2).
32
24
Fig. 3: Connection diagram according to VDI/
VDE 3845