Samson 3969, Монтаж и эксплуатация

Страница: 31 / 48

EB 3969 EN 31
Mounting and start-up
5.1.3 Attachment according to
IEC 60534-6
Required mounting parts and accessories:
see section 3.1.
If the solenoid valve is not configured for at
-
tachment according to IEC 60534-6
(NAMUR rib), additional mounting parts are
only required for mounting onto valves with
rod-type yokes.
1. Check the location of the formed seal or
O-rings on the NAMUR interface and
that of the coded screw.
2. Use two cap screws to fasten the sole-
noid valve on to the adapter plate of the
NAMUR rib.
If the solenoid valve is configured for attach -
ment according to IEC 60534-6 (NAMUR
rib), steps 1 and 2 are not required.
3. For valves with rod-type yokes only: Fas-
ten the support and the rod clamping
plate loosely to the rod.
4. Use a cap screw to fasten the solenoid
valve to the yoke/support.