Samson 3969, Монтаж и эксплуатация

Страница: 28 / 48

28 EB 3969 EN
Mounting and start-up
5 Mounting and start-up
Risk of malfunction due to incorrect sequence
of mounting, installation and start-up.
Observe the prescribed sequence.
Î
Sequence:
1. Remove the protective caps from the
pneumatic connections.
2. Mount the solenoid valve.
Î
Section 5.1 onwards
3. Perform pneumatic installation.
Î
Section 5.3 onwards
4. Perform electrical installation.
Î
Section 5.4 onwards
5.1 Installation
Any mounting position may be used. The
following applies concerning the installation:
Î
Install the solenoid valve in such a way
that the M20x1.5 cable gland faces
downward (in cases where this is not
possible, mount it in the horizontal posi-
tion).
Î
On mounting, make sure that 200 mm or
more clearance is kept above the enclo-
sure cover.
NOTICE
!