Samson 3963 Series, Монтаж и эксплуатация

Страница: 40 / 80

40 EB 3963 EN
Measures for preparation
4 Measures for preparation
After receiving the shipment, proceed as fol-
lows:
1. Check the scope of delivery. Compare
the shipment received with the delivery
note.
2. Check the shipment for transportation
damage. Report any damage to
SAMSON and the forwarding agent
(refer to delivery note).
4.1 Unpacking
Risk of solenoid valve damage due to for-
eign particles entering the valve.
Do not remove the packaging if the solenoid
valve is to be transported to another location
or kept in storage. Do not remove the protec-
tive film/protective caps until immediately
before mounting the device on the valve.
Before mounting the solenoid valve, proceed
as follows:
1. Remove the packaging from the solenoid
valve.
2. Dispose of the packaging in accordance
with the valid regulations.
NOTICE !
4.2 Storage
Risk of solenoid valve damage due to im-
proper storage.
Observe storage instructions. Contact
SAMSON, if need be.
Storage instructions
− Protect the solenoid valve against exter -
nal influences (e.g. impact, shocks, vi -
bration).
− Do not damage the corrosion protection
(coating).
− Protect the solenoid valve against mois -
ture and dirt. In damp spaces, prevent
condensation. If necessary, use a drying
agent or heating.
− Observe storage temperature depending
on the permissible ambient temperature
(see technical data in section 3.2).
− Store solenoid valve with closed cover in
airtight packaging.
NOTICE
!