Samson 3730-2, Монтаж и эксплуатация

Страница: 92 / 128

92 EB 8384-2 EN
Code list
Code
no.
Parameter – Readings/
values [default setting]
Description
31* Position transmitter test
3)
–10.0 to 110.0 % of the
operating range, [default
value is last indicated val-
ue of the position transmit-
ter], ESC
Testing the position transmitter. Values can be entered in relation to
the operating range.
The momentary valve position is used in initialized positioners locally
as the start value (bumpless changeover to the test mode). When
testing by software, the entered simulation value is issued as the po-
sition feedback signal for 30 seconds.
3)
Analog position transmitter: Code 29/30/31 can only be selected if the position transmitter (optional) is installed.
32* Error message in case of
'Function check' con-
densed state
[YES], No, ESC
YES: Error message also in case of 'Function check' condensed
state
No: 'Function check' condensed state does not cause an error
message to be issued
Note
Regardless of the condensed state, the fault alarm output always
switches when the error codes 57, 58, 60, 62 and 64 to 70, 76 are
issued.
33* Error message in case of
condensed state 'Mainte-
nance required'
[YES], No, ESC
YES: Error message only in case of condensed state
'Maintenance alarm' and 'Maintenance required'
No: Error message only in case of condensed state 'Mainte-
nance alarm'
Note
Regardless of the condensed state, the fault alarm output always
switches when the error codes 57, 58, 60, 62 and 64 to 70, 76 are
issued.
34* Closing direction
CL, [CCL], ESC
CL: Clockwise
CCL: Counterclockwise
Direction of rotation to reach the valve's CLOSED position (view onto
rotary switch with positioner cover open).
Needs only be entered in SUb initialization mode (Code 6).
35* Blocking position
[0.0] mm/° /%, ESC
Enter the blocking position (distance to CLOSED position)
Only necessary with SUb initialization mode.