Samson 3349, Монтаж и эксплуатация

Страница: 13 / 104

EB 8048-2 EN 1-7
Safety instructions and measures
WARNING !
Exposure to hazardous substances poses a serious risk to health.
Certain lubricants and cleaning agents are classified as hazardous substances. These
substances have a special label and a material safety data sheet (MSDS) issued by the
manufacturer.
Î
Make sure that an MSDS is available for any hazardous substance used. If neces-
sary, contact the manufacturer to obtain an MSDS.
Î
Inform yourself about the hazardous substances and their correct handling.
Risk of personal injury through incorrect operation, use or installation as a result of
information on the valve being illegible.
Over time, markings, labels and nameplates on the valve may become covered with dirt
or become illegible in some other way. As a result, hazards may go unnoticed and the
necessary instructions not followed. There is a risk of personal injury.
Î
Keep all relevant markings and inscriptions on the device in a constantly legible
state.
Î
Immediately renew damaged, missing or incorrect nameplates or labels.
1.3 Notes on possible property damage
NOTICE !
Risk of valve damage due to contamination (e.g. solid particles) in the pipeline.
The plant operator is responsible for cleaning the pipelines in the plant.
Î
Flush the pipelines before start-up.
Risk of valve damage due to unsuitable medium properties.
The valve is designed for a process medium with defined properties.
Î
Only use the process medium specified for sizing the equipment.