Samson 3349 Скачать руководство пользователя

Страница: 45 / 104

EB 8048-2 EN

6-1

Start-up

The work described in this section is only to
be performed by personnel appropriately
qualified to carry out such tasks.

Risk of burn injuries due to hot or cold

components and pipeline.

Valve components and the pipeline may be

come very hot or cold. Risk of burn injuries.

Allow components and pipelines to cool

down or warm up to the ambient tem-

perature.

Wear protective clothing and safety

gloves.

Risk of personal injury due to pressurized

components and process medium being

discharged.

Do not loosen the screw of the test con

nection while the valve is pressurized.

Risk of hearing loss or deafness due to loud

noise.

Noise emission (e.g. cavitation or flashing)

may occur during operation caused by the
process medium and the operating condi-

tions. Additionally, a loud noise may briefly

occur through the sudden venting of the
pneumatic actuator or pneumatic valve ac-

cessories not fitted with noise-reducing fit

tings. Both can damage hearing.

Wear hearing protection when working

near the valve.

Crush hazard arising from actuator and

plug stem moving.

Do not insert hands or finger into the

yoke while the air supply is connected to

the actuator.

Before working on the control valve, dis

connect and lock the pneumatic air sup-

ply as well as the control signal.

Do not impede the movement of the actu

ator and plug stem by inserting objects

into the yoke.

Before unblocking the actuator and plug

stem after they have become blocked

(e.g. due to seizing up after remaining in
the same position for a long time), re

lease any stored energy in the actuator

(e.g. spring compression). See associat

ed actuator documentation.

Risk of personal injury due to exhaust air

being vented.

While the valve is operating, air is vented
from the actuator, for example, during

closed-loop operation or when the valve

opens or closes.

Wear eye protection when working in

close proximity to the control valve.

WARNING

Содержание 3349









































































































Результаты поиска

Содержание 3349

Отзывы:

Похожие инструкции для 3349

Бренды по названию

Популярные бренды

Samson 3349, Монтаж и эксплуатация

Результаты поиска

Содержание 3349

Отзывы:

Похожие инструкции для 3349

Бренды по названию

Популярные бренды