Samson 2357-3 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 40

Samson 2357-3 Скачать руководство пользователя страница 21

EB 2559 EN

21

Mounting position

4.2.1 Storage

Risk of regulator damage due to improper
storage.

−

Observe storage instructions.

−

Avoid long storage times.

−

Contact SAMSON in case of different stor-
age conditions or long storage periods.

We recommend regularly checking the regu-
lator and the prevailing storage conditions
during long storage periods.

Storage instructions

−

Protect the regulator against external in

-

fluences (e.g. impact).

−

Do not open or remove the packaging
until immediately before installation.

−

Protect the regulator against moisture
and dirt. Store it at a relative humidity of
less than 75 %. In damp spaces, prevent
condensation. If necessary, use a drying
agent or heating.

−

Make sure that the ambient air is free of
acids or other corrosive media.

−

The permissible storage temperature is
between –20 and +65 °C.

−

Do not place any objects on the regula

-

tor.

NOTICE

!

Note

5 Mounting position

Explosion hazard due to the use of oil and
grease in oxygen atmospheres!
Make sure that the regulator is absolutely
clean and free of oil and grease on installing
it.

In the delivered state, the regulators are
packed to be free of oil and grease for oxy

-

gen service. Do not open the packaging until
immediately before installation.

5.1

Preparation for installation

Proceed as follows:

The plant operator is responsible for clean-
ing the pipelines in the plant.

Î

Check the regulator to make sure it is
clean and not damaged.

Î

Make sure the regulator is installed free
of stress.

Î

Flush and clean the pipeline thoroughly

before

installing the regulator.

Any impurities carried along by the process
medium may impair the proper functioning
of the regulator.

Î

Check to make sure that the type desig

-

nation, valve size, material and pressure
rating of the regulator match the plant

WARNING

!

Note

Note

«
...
19
20
21
22
23
...
»

Содержание 2357-3









































Отзывы:

Нет отзывов