HDV
Routing switchers
Sams elektronik d.o.o. • [email protected] • www.sams.rs
elektronik
9
INPUTS
OUTPUTS
VIDEO
UNDO
CONNECTION TO SLAVE REMOTE CONTROLS
CONNECTION
TO PC
CONNECTION
TO ROUTING
SWITCHER
POWER
SWITCH
POWER
SOCKET
LOCK PANEL
LOCK
AUDIO 2
PREVIEW
AUDIO 1
CP-3232, MASTER REMOTE CONTROL 32X32
INPUTS - source keys
OUTPUTS - destination keys
VIDEO - control of video router
AUDIO 1 - control of audio 1 router
AUDIO 2 - control of audio 2 router
UNDO - one step back
LOCK - destination lock
PANEL LOCK - remote control lock
PREVIEW - key to call input/output to preview
output
SLAVE REMOTE CONTROLS - to connect slave
remote controls
PC - connection to PC
ROUTER - connection to routing switcher
CP-3232 is master remote control for video, audio and data routing switchers 32x32.
CONNECTIONS TO X-Y COMMAND
On the front panel there are buttons to select the type of signal (audio, video, data). The command
connects in three levels, therefore press if necessary VIDEO-AUDIO1-AUDIO2 (DATA) ENABLE button.
If the button is illuminated, you can use this audio, video, or data source. When the VIDEO and AUDIO
ENABLE buttons are included, routing switcher operate in either an audio-follow-video. To link the
source and destination, first press and hold the desired destination, and then press the desired source.
Connection can be made also vice versa.
If you notice that the LOCK button is illuminated when you press a destination, that destination is locked
for use. To connect a source to a destination you have to unlock it first.
The keys are numerically defined. It can connect one source to multiple destinations (except in the
case of the DATA matrix, which connects one source to a single destination. To check that the source is
connected to that destination, simply press the desired source and destination buttons will illuminate. If
the destination is not illuminated, that source is not used. In the same way, you can press a destination
and check to which the source is connected. Before checking ensure it is turned on the appropriate
video, audio or data signal level. In a system where are slave controls, the master command has control
over all destinations and can connect and those destinations that are assigned to slave commands.
LOCK
Use this option when you want to lock destination. To lock the destination, press and hold the desired
destination it then press LOCK. In the same way, it unlocks the destination. From that moment that
destination button flashes, which indicates that it is locked. On that destination nothing else can be
brought as a source until destination is unlocked.
Destinations that are assigned to slave commands and which are locked, can be unlocked with any
remote controls in the system using the same destination as well as through the software on the PC.
UNDO
Use this option if you want to restore the previous state of the connection. When you press a destination
and if UNDO button is illuminated, then it is possible to return to the previous state of the connection.
UNDO option saves only one step in all three levels (Video Audio1-Audio2 / data) and each level can
be called independent. UNDO option may not be called if the routing switcher powered on for the first
time. Remote control saves the previous state connections in the event of a power failure or deliberate
