HDV
Routing switchers
elektronik
Sams elektronik d.o.o. • [email protected] • www.sams.rs
10
INPUTS
VIDEO
AUDIO 2
AUDIO 1
CONNECTION
TO MASTER
REMOTE
UNDO LOCK PANEL
LOCK
CP-32, SLAVE REMOTE CONTROL 32X1
CP-32 is slave remote control for video, audio and data routing switchers 32x32 and they have one
destination.
Connect slave command to master. In order to subsequently assign sources and destination as well as
their arrangement via software command must have its own address. Press and hold for a few seconds
PANEL LOCK key. While hold PANEL LOCK select address by pressing SOURCE. The keys are numerically
defined and should press single number from 1 to 16 (the total number of additional commands).
Make sure that the selected address does not match with the already selected in another previously,
addressed slave commands. Pressed button starts flashing. In this way, you will notice that selected
address will be used for this command. After selecting release PANEL LOCK key.
LOCK
Use this option when you want to lock destination. Since this type of commands uses only one destination,
to lock after source selection, press LOCK. From that moment LOCK button lights up. Pressing the key
LOCK unlocks destination. On that destination nothing else can be brought as a source until destination
is unlocked.
Destination that is assigned to slave commands and which is locked, can be unlocked with any remote
controls in the system using the same destination as well as through the software on the PC.
UNDO
Use this option if you want to restore the previous state of the connection. Since this type of commands
shutdown. In a system where two or more commands can control the same destination, return to the
previous state can be made with any such command.
PANEL LOCK
Use this option when you want to lock the entire panel.
PC ENABLE
LED flashes when the PC software is active. Control from the PC is used to connect XY and has the same
functions as the master command.
PREVIEW
PREVIEW button is used for video monitoring of sources and destinations, as well as their connections.
Press the desired level (VIDEO AUDIO ENABLE). Hold PREVIEW button and press the desired source. On
the monitor will display video content from that source and destination buttons that are related to that
source will blink rapidly. Conversely, press PREVIEW button and the desired destination will be displayed
video content, and source from where the content is coming will blink rapidly.
INPUTS - source keys
OUTPUTS - destination keys
VIDEO - control of video router
AUDIO 1 - control of audio 1 router
AUDIO 2 - control of audio 2 router
UNDO - one step back
LOCK - destination lock
PANEL LOCK - remote control lock
REMOTE - connection to master remote control
