HDV
Routing switchers
Sams elektronik d.o.o. • [email protected] • www.sams.rs
elektronik
23
CONFIGURATION SOFTWARE FOR SLAVE COMMANDS
Configuring slave commands can be performed during operation of the system, but can also be while
commands are turned off. The software is for programming slave commands. If the user has previously
described software, and if the names of the sources and destinations was renamed, this software will
print the names. Be sure to turn off the previous software before starting the program.
On the main page you can find places to rename the sources and destinations.
NAMING OF SOURCES
Each source can get their name based on the conditions of the matrix. This feature is very useful
for subsequent configuration of additional commands, but to get a clearer insight into what actually
connects.
Double click the left mouse button over the default names of the sources, a window opens where you
can rename the source. After renaming press OK.
Type a new name in the field
NAMING OF DESTINATIONS
Each destination can get their name based on the conditions of the matrix. This feature is very useful
for subsequent configuration of additional commands, but to get a clearer insight into what actually connects.
Double click the left mouse button over the default names of the destination, a window opens where you can
rename the destination. After renaming press OK.
Type a new name in the field
