Samlex Europe WSC-1250Li Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 39

Samlex Europe WSC-1250Li Скачать руководство пользователя страница 32

32

ENG

12

Use the Charger

12.1 Fan Speed

The fan speed is adjusted according to the load and the temperature inside the charger.
When the load is over 70% of the chargers' amp rating, the fan will turn in 100% speed.
If the load is below 70% of the chargers' amp rating, the fan speed will be determined
according to the temperature inside the charger.
When the temperature goes up, the fan will start turning with temperature 45°C, and reach
100% speed with temperature 65°C.
When the temperature goes down, the fan will slow down the turning speed with
temperature 60°C, and stop turning with temperature 40°C.

Figure 22 Fan Speed

12.2 Functional check

The status LED in the front of the unit can be used to check the status of the charging
process.

Note

The optional remote controller can also be used to check the status of the charging process. The LEDs
on the remote controller indicate different charging phases with their colors respectively.

«
...
30
31
32
33
34
...
»

Содержание WSC-1250Li








































Отзывы:

Нет отзывов