Samlex Europe WSC-1250Li, Руководство пользователя, Страница: 18 / 39

18
ENG
5 Accessories
• Connect the remote controller to the charger. The connection cable is equipped with two
equivalent modular plugs.
• Place the remote controller into the opening created. Secure the remote controller with
screws on the upper and bottom margin of the faceplate – use the available drills.
Note
The length of RC-601D cable is 10M.
6 Mounting of Battery Charger
For mounting battery charger on wall or flat places please refer from Figure 3a for the
WSC-1250Li and WSC-2425Li (page 4), figure 3b for the WSC-1280Li and WSC-2440Li
(page 4) or figure 3c for the WSC-12120Li and WSC-2460Li Charger Top View (Page 4)
regarding the size of housing and the location of mounting holes for your installation.
7 Making Connections
Refer to Figure 5 Making Connections, Page. 5.
• Place the charger in a dry, cool, clean, and ventilated space.
• Set the power switch to “0” (off) and pull out the main plug before connection or
disconnecting the direct current connection.
• Connect the “-“(minus) battery pole with a connecting cable with the”-“(minus) terminal
at the charger (see Figure 5 Making Connections, Page. 5).
• Connect the “+”(plus) battery pole with the connecting cable with the “+”(plus) terminal
at the charger (see Figure 5 Making Connections, Page. 5).
• Lay the cables from the batteries to the charger.
• Fold the cable ends with the multicore cable ends.
• Supply the cable with a fork connection for an ideal connection with the terminal
(see Figure 7 Fork, Page. 6).
Ensure correct polarity at battery and battery charger! The charger is equipped with a reverse
polarity protection that only functions if you first connect the battery and then switch on the
charger!