Samlex Europe WSC-1250Li, Руководство пользователя, Страница: 23 / 39

23
ENG
9 Settings Lithium
Table 9-5 Switch Configure GEL/AGM/Lead-acid / Lithium
Switch 8 Charge mode
OFF Gel/AGM/lead-acid
ON LiFePO4 (Lithium)
9.2 Half power mode setting
When the switch S2 “HALF POWER” is pushed, the output power will reduce to half of the
chargers' amp rating and the “STATUS” LED will flash. The switch S2 is a kind of no memory
switch. That means "ON/OFF" status cannot be identified from the switch. To enter and exit
the "HALF POWER" mode by turns, please push the switch S2. The "HALF POWER" mode can
be told from flashing "STATUS" LED.
Due to the fan speed is adjusted according to the function of the load and the temperature
inside the charger, when "HALF POWER" mode is on, the fan speed will be slowed down and
become silent because of output current reducing to half the charger amp rating.
Note
Please refer to section 12.1 on page 32 to understand the function of fan speed.
9.3 Equalization setting
The Equalization does not work in Lithium mode.
9.4 VOID setting table
To avoid the void setting, please refer to Table 9-6 VOID Setting table for pushing switch on
front panel, Page. 23.
Table 9-6 VOID Setting table for pushing switch on front panel
Push switch on front
panel
Original working mode
Half power Equalization Others Power Supply
S2 "HALF POWER"
pushed
Exit "HALF
POWER"
("STATUS" LED
lights)
VOID
Enter "HALF
POWER"
("STATUS" LED
flashing)
VOID
S3 "E.Q." pushed
VOID VOID VOID VOID