Samlex Europe WSC-1250Li, Руководство пользователя, Страница: 21 / 39

21
ENG
8 Settings Gel/AGM/Lead-acid
8.2.3 Selection Gel/AGM/loodzuur/Lithium
Table 8-5 Switch Configure GEL/AGM/lead-acid / Lithium
Switch 8 Charge mode
OFF Gel/AGM/lead-acid
ON LiFePO4 (Lithium)
8.3 Equalization setting
When the switch S3 “E.Q.” is pushed, the function of equalization is activated and the “E.Q.”
LED will light RED. Whenever the function of equalization is activated, it only can be cancelled
by turning off the charger.
Note
The equalization function can be set only when the charger is NOT in the half power mode and NOT in
the power supply mode. (See Table 8-6 VOID Setting table for pushing switch on front panel, Page. 21).
8.4 VOID setting table
To avoid the void setting, please refer to Table 8-6 VOID Setting table for pushing switch on
front panel, Page. 21.
Table 8-6 VOID Setting table for pushing switch on front panel
Push switch on front
panel
Original working mode
Half power Equalization Others Power Supply
S2 "HALF POWER"
pushed or DIP switch 7
in ON position
Exit "HALF
POWER"
("STATUS" LED
lights)
VOID
Enter "HALF
POWER"
("STATUS" LED
flashing)
VOID
S3 "E.Q." pushed
VOID VOID
Equalization
("E.Q." LED
lights Red)
VOID