Samlex Europe WSC-1250, Руководство пользователя

Страница: 25 / 29

25
ENG
10 Trouble Shootings
10.1 The battery voltage would NOT increase after charging
• If possible, measure with a suitable multi-meter during the charging to verify if the voltage
at the battery terminals increases.
• Determine whether the terminals are connected properly to the battery poles. Clean the
battery poles if necessary to ensure better connection.
10.2 The battery is NOT fully charged after a charging time about 20 hours
• Disconnect the power to the charger.
• Remove the battery from the charging terminals and wait for a few minutes.
Then, measure the voltage at the battery terminals with the multi-meter.
10.2.1 12V battery
If the multi-meter displays a voltage of 10V or less, this indicates that the battery is defective
and can not be charged any longer.
10.2.2 24V battery
If the multi-meter indicates a voltage of 20V or below, allow the battery be checked by a
specialist, if necessary dispose of the battery.
10.3 The battery discharges after a short period of time without usage
Measure the voltage at the battery terminals with a suitable multi-meter. If the multi-meter
indicates a voltage below 12V of a 12V battery or a voltage below 24V of a 24V battery, then
the battery is too weak to retain the charge.