Samlex Europe WSC-1250, Руководство пользователя

Страница: 11 / 29

11
ENG
1 General safety and Installation instructions
1.1 Operate the device safely
Warning!
Failure to observe this instruction can cause material damage, device malfunction, or danger
of bodily injuries.
Fundamental safety measures should be observed when using electrical equipment to avoid
the danger of:
– Electric shock
– Fire hazard
– Injury
1.2 Safety instructions when installing the device
• Handle the batteries with care; they contain strong acids.
• Avoid contact with the battery fluid agent.
• If come in contact with battery fluid, one should rinse the affected parts of
the body or clothing with plenty of cold water and seek medical attention immediately.
• Be sure that the device has a firm foundation.
• Do NOT use sharp or hard objects to clean the device; doing so may cause device
damage.
1.3 Electrical cables
If cables have to be fed through metal walls or other walls with sharp edges, use ducts or
wire bushings to prevent damage.
• Lay the cables so that other people will NOT trip over them.
• Do NOT lay cables which are loose or bent next to electrically conductive materials.
• Do NOT pull the cables.
• Fasten the cables properly.
• Lay the cables so that they cannot be easily damaged
• Always use sockets that are grounded and secured by earth leakage circuit breaker.
• Only a specialist should make the electrical connections.
• Do NOT lay the 115V/230V line and the 12V DC in the SAME cable duct!
• Keep to the indicated minimum cable cross-section.
1.4 Installation on boats
• Incorrect use or installation of the charger on boat may lead to corrosion of the boat.
Please allow qualified personnel to perform the installation of the charger.