23
ENG
9
Using the Charger
Figure 18 Temperature Compensation for 24V Model
Note
• The temperature sensor is only working in I, Uo and U phases.
• The output voltage is adjusted according to the function -25mV/°C for WSC-1250 and -50mV/°C for
WSC-2425. However, the maximum output voltage is 15V/30V, and the minimum is 13.2V/26.4V.
• When the battery temperature detected via TF-100 reaches 55°C, the charger will stop the charging
process ("E.Q." LED flashing Red and "STATUS" LED lights Orange), and auto recover when
temperature drops to 45°C.
9.4 Fan Speed
The fan speed is adjusted according to the load and the temperature inside the charger.
When the load is over 70% of the chargers' amp rating, the fan will turn in 100% speed.
If the load is below 70% of the chargers' amp rating, the fan speed will be determined
according to the temperature inside the charger.
When the temperature goes up, the fan will start turning with temperature 45°C, and reach
100% speed with temperature 65°C.
When the temperature goes down, the fan will slow down the turning speed with
temperature 60°C, and stop turning with temperature 40°C.
Содержание WSC-1250
