Samlex Europe WSC-1250, Руководство пользователя

Страница: 13 / 29

13
ENG
4 Introduction of the unit variants
The 4-stage battery charger can deliver different unit variants. It can charge batteries up to
the specified battery capacity as indicated in the specification section. Regarding the identifi-
cation of the specification of your unit, please see the model number on the type plate.
Front view Model-No.: WSC-1250 and WSC-2425
(See Figure 1 WSC-1250 / 2425 / Charger Front View, Page. 2)
No. Description
1. "TEMP" connection for temperature sensor (accessory TF-100)
2. "REMOTE" connection for remote control (accessory RC-600)
3. Switch field S1 for the selection of the charging voltage, charging time limitation
and power supply mode (see also Figure 8 Switch, Page. 5)
4. "STATUS" LED
5. "E.Q." equalization LED
6. On/Off switch S2 for half power mode
7. Switch S3 for equalization on only
8. "+" (plus) DC output terminal for the supply battery
9. "-" (minus) DC output terminal for the supply battery
10. Connection for AC input 100~240 volts voltage
11. Plug holder
Rear view
(See Figure 2 Charger Rear View, Page. 2)
No. Description
1. Ventilation outlet
2. Power switch
5 Accessories
5.1 Temperature Sensor TF-100
The temperature sensor (Figure 9 Temperature Sensor TF-100, Page. 6) measures the
temperature of the battery or the environment around the battery and transfers the data
to the charger. With deviating temperatures, the charging voltage increases and decreases
accordingly.
5.1.1 Functions
• The temperature sensor transmits the battery temperature to the charger.
• The charging voltage is adjusted according to the temperature measured.