SAMES KREMLIN Inogun A, Руководство пользователя

Страница: 33 / 60

Index revision : B - September 2020 33 7133
6.3.3. Procedure C1: Rear body
Removal
:
•
Gently fire to separate the rear body from
the gun.
•
Disengage the connector using a small
screwdriver of 3 to press the tab.
• Loosen the ground screw.
• Check the general condition, wires, termi-
nal and connector, replace the rear body
if necessary.
Installation
:
• Replace the rear body, taking care not to
pinch the wires.
Connect the ground wire, press the wire
against the protective cover assembly.
• Connect the blue connector.
•
Twist the blue connector 1/4 turn to position
it longitudinally in the protective cover.
The wiring makes a
″
S
″
.
• Then push the rear body against the gun.
•
Using an ohmeter, test the continuity between the HV contact and the protective cover.