SAMES KREMLIN Inogun A, Руководство пользователя

Страница: 13 / 60

Index revision : B - September 2020 13 7133
These tests must be carried out periodically The following maximum intervals between tests are
recommended (see § 7.2.3 table 4 in standard EN 50177).
1.7. Important recommendations
1.7.1. Ventilation
Do not start the powder application with the Inogun A projector until the spray booth ventila-
tion system is switched on. If the ventilation is switched off, toxic substances or dust may remain
in the spray booth and cause a risk of fire, poisoning or irritation.
1.7.2. O-ring seals
Use the seals recommended in this manual.
1.7.3. Safety devices
When installing the projector, safety devices must be provided.
• Detection of control system faults.
• Detection of high voltage surges associated with the
SAMES KREMLIN
HV generator.
• Detection of air pressure drops.
• Detection of ventilation failure.
• Detection of variations in ventilation flow rates.
•
Detection of fire.
Failure to install safety devices could result in a risk of fire, expose the personnel to serious injury
and damage the equipment.
WARNING : The electrostatic projection systems must be equipped with an automatic fire extin-
guishing system (according to § 5.2.5 in standard EN 50177).
1.7.4. Mechanical collision
The guarantee does not cover damage resulting from the operating environment (for example:
collision with the robot).
1.7.5. Ambient temperature
The atomizer is designed to normally operate at an ambient temperature comprised between
0°C and + 40°C.
The storage temperature must never 60°C.
Reference Test frequency
Complete installation safety test in relation to
workers
12 months
Forced ventilation effectiveness in continuous
Disconnection in the event of an overload cur-
rent
after each start-up
Low voltage disconnection after each start-up
Discharge energy weekly
Protection against cleaning product inflamma-
tion
before each cleaning
Protection against direct contact weekly
Earthing measures weekly
Protection against inputs weekly
Site's fire extinguishing system 6 months
Other tests in accordance with standard EN 16985:2018