SAMES KREMLIN ASB GUN, Перевод с оригинала инструкции, Страница: 45 / 46

SAMES KREMLIN - 6 - N° : 578.091.120-UK-1905

INSTALLATION DIAGRAM
Captions :
A Explosive area area 1 (Z1) or area 2 (Z2) :
spray booth
1 Pump
2 Filter
3 Airless automatic gun
4 Conductive HP fluid hose
5 Air hose (control air)
6 3 way-valve or electrovalve
1 - By means of a conductive high pressurefluid hose (3), connect the gun fluid fitting to the pump.
Tighten firmly the fittings.
2 - By means of an air hose (4), connect the gun 'Control air' fitting to the valve or the electrovalve (5)
that will control the opening and the closing of the gun.
A minimum pressure of 3 or 4 bar / 43.5 or 8 psi is necessary to control the gun
(
 control air).
Nota : The gun (and its eventual base) must be grounded by, at least, one of the
three next solutions :

by means of the fixing device on the machine,

by means of the static conductive air hose,

by means of the conductive or static conductive fluid hose.
The ground resistance between the gun and the floor must be ≤ 1 MΩ.