Operator's Manual
Comb Side-Delivery Rake TWIST 600
- 18 -
5.8. Dismounting machine from tractor
NOTE:
When detaching, make sure there is no person in between the machine
and the tractor.
To detach the machine from tractor:
Set the machine on an even, stable ground,
eject support feet and lower the rake,
turn off the tractor's ignition and take the tractor's ignition key out,
secure the tractor against free runaway,
disconnect the machine's hydraulics from the tractor,
disconnect the wiring from the tractor – if present,
detach the machine from the tractor.
6.
MOUNTING AND ADJUSTMENTS
6.1.
Replacing tines
Tines should be installed as provided in Fig. 18.
Fig. 18. Installing raking tines
NOTE:
Use original tines recommended by the machine's manufacturer only.
6.2.
Daily maintenance
When you finish each day of operation carry out the following maintenance:
check all visible parts and components and their connections; tighten all loose bolts and nuts
and replace all damaged and/or worn parts with new genuine ones,
after each raking wash the rake with water under pressure,
remove any grass, dirt and mud from the machine,
check condition of the rake's hydraulic assembly,
check condition of working units,
if necessary, lubricate the other parts and assemblies in accordance with the lubrication
instructions (item 7).
WARNING!
After first hours of operation tighten all bolts.
