Operator's Manual
Front disc mowers
TORO
- 5 -
3.3.
Standard equipment and spare parts
The mowers are sold with the following standard equipment:
warranty card,
operator's manual with list of spare parts,
cutting knives: two sets per mower
–
left and right knives,
mounting holders for lights and plates,
PTO shaft,
hitch triangle,
spray paint (150 ml).
Optional extra equipment:
warning plates with combined lights and reflectors,
warning triangle,
support clamp holders,
high mowing toppings,
side shift adaptor,
cutting disc,
high mowing toppings / double toppings.
NOTE:
Optional equipment should be ordered separately.
The mower is equipped with optional equipment such as holders and brackets used to mount
warning lights and plates. Combined lights and reflectors are mounted on warning plates.
Tab. 3.
Recommended PTO shaft
Mower
Power
Length
Torque
Ref.
Clutch
Manufacturer
HP
mm
Nm
TORO 260; TORO 262
TORO 300; TORO 302
TORO 340; TORO 342
74
850- 1286
520
8G5T085CE007001
Sprz
ę
gło cierne
= 1200 Nm
Bondioli & Pavesi
Fig. 4.
Shaft lubrication points. Mounting directions
NOTE:
Lubricate the shaft frequently as indicated. Lubricate points marked in
Fig. 4
every 50 shaft
operating hours.
Lubricate the PTO shaft also before and after period of longer idleness.
PTO shafts of other brands with equivalent parameters could be used after first obtaining
SaMASZ permission.
If the clutch is overloaded too often (noises heard), it can be seriously damaged (burnt
paintwork seen on the clutch surface).
PTO shaft end without clutch
–
To be mounted on the tractor's
side
PTO shaft end with friction
clutch
–
To be mounted on the
mower side
