Operator's Manual
Front disc mowers
TORO
- 27 -
B
A
Tab. 6.
Oil capacities to be filled in cutterbar
Mower type
Oil capacity
[L]
Oil type
Lubrication frequency
TORO 260; TORO 262
5,0
80W90
After first 50 h of operation, then after
next 500 h (or at least once a year)
TORO 300; TORO 302
6,0
TORO 340; TORO 342
6,5
7.3.
Intersecting axis gears
On daily basis prior to work commencement check the oil level and, if needed, refill once
removing the vent
A
(
Fig. 27
) in upper section of the gear. The oil level can be checked by opening
check opening
B
on the side of the gear. Refill the oil until it is visible in the check opening
B
. The
oil capacity in the gear: approx. 1 L Oil level is checked after the cutterbar is set horizontally on the
ground.
Tab. 7.
Oil capacity to be filled in gear
Mower type
Oil capacity
[L]
Oil type
Lubrication frequency
TORO 260; TORO 262
TORO 300; TORO 302
TORO 340; TORO 342
approx. 1
SAE 80W/90, API
GL-4
After first 50 h of operation, then
after next 500 h (or at least once a
year)
Fig. 27.
Oil check and replacement points in intersecting axis gears
NOTE
Strictly follow the above instructions. If disks on the cutterbar can move freely, high
temperature of axis gear should not be a point of concern, as in result of a long-term
operation the temperature may reach 100°C.
A
