Operator’s manual
Double-sided disc mowers
with central suspension
- 7 -
3-point linkage frame (
1
) enables attachment of the mower to tractor’s 3-point linkage. Drive
from tractor's rpm is transmitted through PTO shaft (
9
) an intersecting axis gear I (
3
) onto drive
shafts (
6
), which, through intersecting axis gears II (
7
), power the cutterbars (
4
). On cutterbars,
have discs with two knives each. Hydraulic lifting cylinders (
2
) fed from the tractor external
hydraulics are used for adjusting the mower to working position. Main frame (
11
), on which
cutterbars unloaded with springs (
8
) are installed. On main frame, safety guard (
5
) and two swath
guides (
12
) are mounted. The mower is equipped with warning and signal plates (
10
) as standard.
On main frame, safety guards (
5
) are mounted.
3.2.2.
Double-sided disc mowers with tine conditioner
Fig. 3b.
Parts of SaMASZ double-sided mower with tine conditioner (KDD S/SL)
3-point linkage frame (
1
) enables attachment of the mower to tractor’s 3-point linkage.
Drive from tractor's rpm is transmitted through PTO shaft (
9
) an intersecting axis gear I (
3
) onto
drive shafts (
6
), which, through intersecting axis gears II (
7
), power the cutterbars (
4
). On
cutterbars, have discs with two knives each. Moreover, drive from tractor's rpm is transmitted
through intersecting axis gear I (
3
), PTO shafts (
6
), intersecting axis gears II (
7
) directly transmitted
onto swath conditioners (
12
). Hydraulic lifting cylinders (
2
) fed from the tractor external hydraulics
are used for adjusting the mower to working position. Main frame (
11
), on which cutterbars (
4
) are
installed, is unloaded with springs (
8
). On main frame, safety guards (
5
) are mounted. The mower
is equipped with warning and signal plates (
10
) as standard.
9
1
6
8
2
11
5
10
3
4
7
12