Operator’s manual
Double-sided disc mowers
with central suspension
- 49 -
6.5.
Adjusting the cutterbar
Swath width is adjusted with swath guides (
1
) mounted on the 3-point linkage frame of
the cutterbar (
Fig. 34
).
In order to adjust the guide, the following should be performed (for: KDD 861 (H), KDD 911
(H), KDD 912 (H), KDD 941 (H)):
loosen locknuts (
2
) and screws (
3
),
shift the guide arm (
6
),
tighten screws (
3
) and locknuts (
2
),
loosen locknuts (
4
) and screws (
5
),
then adjust shield height and angle (
7
),
tighten screws (
5
) and locknuts (
4
).
Fig. 34.
Adjustment of swath guides: 1 - swath guide, 2 - locknuts, 3- arm adjustment screws, 4 - locknuts,
5- shield adjustment screws, 6- guide arm, 7- shield
In order to set swath width, adjustment of swath guides (
1
) should be performed (
Fig. 35
)
(for: KDD S/ST/SL/SLT (H)):
loosen eye screw (
2
) of the swath guide,
set the swath guide (
1
) as needed,
tighten screw (
2
),
even spreading of swath might be adjusted with wheels (
3
) the same as it is performed with
guides.
1
2
3
6
4
5
7