Operator's manual
Trailed disc mowers
KDC
- 38 -
Fig. 35.
Cleaning conveyor rollers
2. Impurities inside belt are removed once conveyor is in vertical position. Belt is deflected with
hand and then impurities are removed with a hook wire.
Fig. 36.
Removing impurities from inside belt
6.10.2.
Conveyor belt replacement and adjustment instruction
KDC mower with conveyors must be suspended onto tractor.
I.
The adjustment of the belt conveyor should be done only when the conveyor is in its
working position (horizontal)
1.
Using a marker, mark lines on millimeter measures – decal N-79 (if belts worked well).
2.
Loosen tightening roller mechanism – bolts M10 -
S
1
, nuts, M12 –
N
2
and loosen adjustment
bolt M12 –
S
2
by approx. 1.2” (
Fig. 37
).
1
Bulges
1
D
