Operator's manual
Trailed disc mowers
KDC
- 47 -
11.
WARRANTY CARD
TRAILED DISC MOWER
The product quality has been checked and meets the required standards and regulations and is
permitted for use.
NOTE:
A warranty card without the required information or with corrected or illegible
information –
is invalid.
12.
WARRANTY TERMS
12.1.
Warranty claim procedures
1.
The manufacturer guarantees its products against faults in materials or production.
2.
Warranty period is for two years from the date of sale to the purchaser, stated above.
3.
Any repair which is subject to warranty should be carried out by an authorised SaMASZ dealer.
Upon completion of the repair, the dealer must submit a warranty claim within 14 days.
4.
Warranty claims regarding replacing of the product are considered if received within 14 days
after it is completed by the manufacturer.
5.
The following situations are not covered by the warranty:
a)
use of the mower for any purpose other than described in the operator's manual,
b)
fortuitous events or other occurrence, for which the Manufacturer does not bear any
responsibility,
c)
normal wearing of parts such as: mowing discs, slides, knife holders, intersecting axis
gears and parts within, bushings and sliding bushes, clutches, joints, cutting knives, v-
belts, cogs, driving chains, conditioner flails, rubber elements, rubber and metal
dampers, bearings, lower hubs, canvas covers, tires, conveyor belts, guide rubber
elements, fastening elements, etc.
These repairs may be carried out only at the purchaser’s cost.
d)
operation on stoney fields and results such as: damage tine conditioner’s shaft, discs,
bending of cutterbar (stone with its diameter of 5.5" will not move between the discs
and conditioner's shaft),
e)
running into any obstacle,
f)
too fast lowering of the cutterbar to the ground,
g)
transport and accidental damage,
h)
breaking, damage of tine conditioner's shaft, conveyor's belt.
6.
The Purchaser bears the costs of technical evaluation - when the manufacturer finds that
a claimed product is free of defects and a technical report confirms that.
7.
The Manufacturer has the right to cancel the warranty in the following cases:
Serial number
Date of manufacture
Manufacturer stamp
QC signature
Date of purchase
Dealer stamp
Dealer signature
