Operator's manual
Trailed disc mowers
KDC
- 15 -
Fig. 5.
Location of centre of gravity
Tab. 7.
Location of centre of gravity
Dimension
[mm]
Mower type
KDC 260
KDC 260 S
KDC 260 SL
KDC 260 ST
KDC 260 SLT
A
4150
4420
4415
4720
4720
B
810
825
830
800
805
Dimension
[mm]
Mower type
KDC 300
KDC 300 S
KDC 300 SL KDC 300 ST KDC 300 SLT KDC 301 W KDC 301 WT
A
4180
4440
4435
4750
4750
4460
4820
B
830
850
855
800
800
820
800
Dimension
[mm]
Mower type
KDC 340
KDC 340 S
KDC 340 SL
KDC 340 ST
KDC 340 SLT
A
4610
4865
4860
5200
5200
B
830
850
855
795
795
Dimension
[mm]
Mower type
KDC 341
KDC 341 W
KDC 341 WT
KDC 390
KDC 430
A
4610
4920
5270
4190
4700
B
830
805
795
815
805
4.5.
Working parts
Before operating the mower, check knife’s, knife mounting’s and knife holder’s condition.
Worn or damaged knives, knife mountings or knife holders should be immediately replaced
with new ones.
4.6.
PTO shaft
Before operating, read bar manufacturer's manual placed on the bar. Follow all safety
precautions in that manual.
Use only PTO shafts recommended by mower’s manufacturer with guards in good condition.
In order to operate safely, use only undamaged PTO shafts and shields. Damaged PTO shafts
and shields must be repaired or replaced with new ones before use.
4.7.
Hydraulic assembly
Hydraulic assembly is under high pressure. Hydraulic oil under pressure may penetrate skin and
cause serious injury or death. Skin and eyes should be protected when working around this
assembly.
In case of injury caused by a liquid under pressure, call a doctor immediately.
