SaMASZ DUO 680, Руководство оператора

Страница: 29 / 52

29
OPERATOR’S MANUAL DOUBLE-ROTOR RAKES DUO
NOTE:
If need be, shorten the PTO shaft according to corresponding operator's manual
given by the shaft’s manufacturer ( Fig. 26 ).
Fig. 26. Instruction of PTO shaft shortening
NOTE:
The PTO shaft should remain mounted only for the rake's operation time. For
transport and service time the shaft should be disconnected from the tractor.
NOTE:
Use machines with correspondingly designed driving PTO shafts. Prior to the
work commencement, safety guards should be inspected whether they (in the
tractor, the mower and the PTO shaft) are placed correctly and are not
damaged. Damaged or missing parts must be replaced with genuine ones. Make
sure that the PTO shaft is mounted properly. Approaching the rotating parts is
strictly forbidden, as it may lead to serious injuries or even cause death. For any
service and repair works of the shaft and the machine, the tractor engine and
its drive must be disconnected. Prior to the operation commencement, read the
operator's manuals of both the machine and the PTO shaft.
NOTE:
When changing the tractor, with which the machine operates, control the length
of U-joint shaft again, as otherwise the machine can be damaged.
5.7. Switching the rake from transport to operating position
❑
make sure there is no person around the danger area,
❑
turn on shut-off valve which is located at the tractor,
❑
lower carts with hydraulic lifting device in the slowest way possible in order to cushion contact with
the ground,
❑
take out raking arms from transport holders, put them into the rotor and lock with cotters,
❑
remove the raking tines plastic covers,
❑
lower safety guards,
❑
extend the swath guard to required length.