SaMASZ DUO 680, Руководство оператора

Страница: 14 / 52

14
DUO DOUBLE-ROTOR RAKE
DWUKARUZELOWA
OPERATOR’S MANUAL
❑
Always pay attention to the recommended overlap of the PTO shafts in working and transport
positions.
❑
Before you start work, you must make sure that the PTO shaft is spinning in the right direction and
that the tractor PTO RPM matches the permissible RPM levels of the machine.
❑
When using the power PTO shaft there must be nobody in the danger zone of the rotating telescopic
joint shaft or PTO shaft.
4.7. Hydraulic assembly
❑
Caution! Hydraulic assembly is under pressure! Hydraulic oil under pressure may penetrate skin and
cause serious injury. Skin and eyes should be protected in particular. In case of injuries caused by
a liquid under pressure, call a doctor immediately.
❑
Hydraulic hoses can be connected to the tractor's hydraulics provided that both the tractor’s and
the rake's hydraulic assemblies are not under pressure. To remove the pressure from the hoses,
start the tractor's hydraulic valves several times with the tractor off.
❑
When unmounting the machine from the tractor, set the equipment used aside, deflate the pressure
from hydraulics and turn the tractor's engine off.
❑
When inspecting the hydraulic assembly for malfunctions and oil leaks, do not touch any potential
leaks as the assembly is under pressure.
❑
Note! Use only hydraulic oil featuring oil purity class 9 - 10 in accordance with NAS 1638.
When using hydraulic hoses:
❑
Avoid stretching the hoses when operating.
❑
Do not allow hydraulic hoses to get deflected.
❑
Do not expose hydraulic hoses to contact with any sharp edges.
❑
If damaged or worn, replace the hoses with new ones.
❑
Useful life for hydraulic hoses is 5 years from their production date.
4.8. Tires
❑
The air pressure in the wheels must be regularly checked and maintained at the appropriate level
recommended by the manufacturer.
❑
Repair work on the machine’s tyres and wheels may only be carried out by qualified personnel with
the appropriate tools for this type of work.
❑
When carrying out maintenance and repair work on tyres and wheels, ensure that the machine is
properly parked and secured against rolling away (use wedges).
❑
Disassembly and assembly of the wheels requires appropriate skills and equipment.
4.9. Residual risk
Despite the fact, that SaMASZ company – the manufacturer of the rake takes the responsibility
for the rakes design and manufacturing, in order to eliminate hazard, certain risk when operating the
machine is unavoidable.
4.9.1. Danger of catching
This kind of risk occurs when the rake's position is changed, when operating near rotating parts,
operating without safety guards.
When operating, maintenance and regulation works are conducted always wear protective
gloves, footwear and clothing with no loose parts, belts, etc. Always comply with safety decals placed
on the rake.