Sam4s SPS-300 Series Скачать руководство пользователя страница 25

Страница: 25 / 324

Sam4s SPS-300 OP Manual v1.35

Introduction • 21

Control Lock

The control lock has 7 positions, accessed with 5 keys. Each ECR is shipped with two full sets
of keys.

VOID

Use to void (correct) items outside of a sale.

OFF

The register is inoperable.

REG

Use for normal registrations.

Use to read register reports.

Use to read register reports and reset totals to zero.

Use to program the register.

The S position, is a hidden position, reserved for

dealer access.

Before performing any operations in Register Mode, a clerk must be signed on. See “Clerk
Sign-On/Sign-Off” for a description of clerk operations.

Control Keys

All SPS-300 series models include two sets of keys that may be used to access the following
control lock positions.

Key

Positions Accessible

REG

OFF, REG

VOID, OFF, REG, X

VOID, OFF, REG, X, Z

VOID, OFF, REG, X, Z, P

ALL POSITIONS

Note: Keys may be removed from the control lock in the OFF or REG positions.

VOID

REG

OFF

Содержание SPS-300 Series





































































































































































































































































































































Результаты поиска

Содержание SPS-300 Series

Отзывы:

Бренды по названию

Популярные бренды

Sam4s SPS-300 Series, Руководство оператора

Результаты поиска

Содержание SPS-300 Series

Отзывы:

Бренды по названию

Популярные бренды