Sam4s SAM4POS, Руководство по программированию

Страница: 325 / 350

Sam4POS 6600/4800II Program Manual v2.12 Integrated Payment Appendix
•
325
Important Notes:
•
“Close Batch” or “Clear EMV File” operation needs to be performed every day at the register
even when the site is set for auto batch with their processor. This is how Sam4POS clears the
EMV token file. The EMV token file is used to allow for “By Record” transactions (such as
Voids and Gratuity Entries).
•
PIN-Pad is customer facing…. There is no indication to cashier what the end-user is doing (or
not doing).
•
Cannot suppress the signature line. In the non-EMV world we added a flag to the registers:
“NO SIGNATURE IF TRANSACTION IS UNDER $xx”. When this flag is set, the register
will not print the signature line if the transaction is under the configured amount (usually set
at $25). In the EMV integration, the register receives the receipt data from the Datacap
device and the signature line is included in the receipt data … therefore it cannot be
controlled at the register.
•
Debit cards with EMV chip - Since Datacap \ mercury do not currently support EMV Debit,
all EMV Debit cards are forced to be inserted and are then processed as regular credit
cards. This usually means a higher rate for the merchant on transactions over $25.
•
The Pin-Pad Timeouts settings cannot be configured at the register. Some say they are too
short, other say they are too long… cannot configure at register.
• Consolidated Reports; If an end-user wants consolidated reporting they must use the
configuration with Tran server (even if only two registers in their system).
•
EMV Quick Chip is an enhancement to EMV processing that speeds up EMV transactions to
about 2 seconds or less. EMV Quick Chip is available for all processors that support Ingenico
Pin-Pads, installations that expect fast processing times should use Processors that support
Quick Chip. Look here for the latest information:
https://www.datacapsystems.com/tran-series-supportedfeatures