Sam4s SAM4POS, Руководство по программированию

Страница: 237 / 350

Sam4POS 6600/4800II Program Manual v2.12 Program Mode • 237
Datacap Operation Definitions
Operation
Definition
Initialize EFT Use this function to initialize the Datacap EFT device.
Close Batch Closes the current batch and opens.
Reprint Batch
(Requires v1.0.77 or later.) Enhanced Sam4POS to print the batch
information in a more readable format. Also added the ability to
reprint the batch information.
Void Sales By Record Number Use these operations to void transactions when the card is not
present. CAUTION: These voids will not correct ECR totals (i.e.
PLU Sales) but will maintain a total on the Financial Report.
Use the Void Mode function at the SAM4POS terminal to perform
transaction voids that will correct the appropriate sales totals.
Void Return By Record Number
Issue Local Transaction
If “terminal based” processing is used, the Local Transaction
Report contains details of each transaction in the current batch.
When “host based” processing is used, transaction data is stored at
the processor.
Gratuity Entry
The Gratuity Entry command allows the operator to add a tip to a
pre-authorized credit sale.
Post Authorization
If electronic authorization is not approved and the merchant
receives voice authorization, the transaction can be entered into the
batch with this operation.
Parameter Download Use this function to get new PIN Pad parameters from Datacap
Get Gift Card Balance
Select Gift Card Balance, the operator will be prompted to slide a
gift card. The balance will be printed on the receipt printer
Get EBT Balance Use to check the EBT food stamp balance
EMV Voucher For EBT Use to manually enter EBT transactions.
Test Mode Only used for certification testing.
Self-Initiated Load Used to load the Datacap EMV device parameters.
Diagnostics
Used to perform various diagnostics. Use as requested by Datacap
support.
Clear EMV Value
This clears the internally stored token file that stores the
Authorization Response messages that allow the SAM4POS to
perform “By Record Number” transactions. Specifically, the Void
Transaction by Record Number and Gratuity Entry.
Zero Auth
Use this operation to verify a card is valid, activated, not reported
as lost/stolen.
Pin Pad Reset
Use to Initialize\Reset the Pin-Pad connected to the installed
Datacap device.
Reprint Batch Use to reprint previous batch.
(Requires v1.0.77 or later.)