Sirius 800 Series User Manual
4929 Sirius 800 Audio AES/MADI Output with Audio Delay
Output Modules and Rear Panels 11.1
Iss 5 Rev 7
Page 177
© 2017 SAM
11.1.5 Audio Processing on the Output Module
The 4929 audio output module can manipulate the audio channels received from the audio
crosspoint before outputting them.
Audio processing is controlled from Workbench, RollCall or RollPod panels.
Figure 113 and Figure 114 show the order that the processing is applied to the audio signals.
Note:
•
Sample Rate Conversion (SRC) is a licensed option and must be purchased for
each module it is used on (see section 3.6 for details).
•
The audio processing functions allow delay, gain control, phase invert and stereo
mode (left/right swap, left both, right both or mono mix). The audio processing is
standard for each audio module.
Figure 113 Audio Channel Processing Block Diagram (AES Rear Panel)
Figure 114 Audio Channel Processing Block Diagram (MADI Rear Panel)
*Input/Output Monitoring selected from either the input or the output of the module (pre
or post processing). See section 5.6.3 for details on how to configure this using the
router Door screen.
*Input/Output Monitoring selected from either the input or the output of the module (pre
or post processing). See section 5.6.3 for details on how to configure this using the
router Door screen.
