Sam Cook MASTERCHEF EXECUTIVE TERMOROBOT WiFi, Руководство пользователя

Страница: 36 / 42

EN
38
FITTING / REMOVING THE MIXER ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Follow the steps described in point 1-3
in the section FITTING/REMOVING THE
BOWL.
2. Pls install mixer (5) on the drive shaft (25)
inside the bowl.
USAGE -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
The following operating descriptions contain a
diagram of how to work with the appliance. You
will find detailed recipes for individual dishes,
their ingredients, proportions and weight in the
food processor recipe database.
1. Install the drive shaft (25) in the bowl and
install the bowl in the housing.
2. Depending on the nature of the food to be
prepared, install the appropriate accessory:
knife (6), mixer (5), butterfly (4) or strain -
er (7).
ATTENTION! The knife blades are very sharp.
Be careful not to get hurt.
3. Put the food to be processed in the bowl.
Do not exceed the maximum volume of
the bowl (max 3000 ml). If you are going to
cook food in the strainer (7), pour enough
water (broth, stock) into the bowl to cover
the food in the strainer. When adding the
products to the bowl, it is possible to dose
them precisely thanks to the scales function
(see: “SCALES FUNCTION”). If you will be
preparing dishes from recipes, fill the bowl
according to the instructions for the recipe.
ATTENTION! Do not fill the bowl over
3000 ml and over 2500 ml.
ATTENTION! Be especially careful when
cooking food. Do not run the appliance with
an empty bowl. When cooking products in
the strainer, take care of the right amount of
water in the bowl.
ATTENTION! When inserting and pouring the
ingredients into the bowl, take special care
not to flood the base of the appliance. Danger
of electrocution.
4. Install the bowl lid (2) on the bowl (8).
5. Connect the appliance to the mains and
then switch it on using the button (9) on the
left side of the appliance. If you do not take
any action within 5 minutes, the appliance
will go into sleep mode. Restarting is done
by touching the control panel.
6. After starting the food processor, select the
appropriate mode from the touch control
panel.
A red dot at the bottom of the display indicates
the current operating mode.
Recipes – select the appropriate recipe, contin -
ue with the displayed instructions.
Custom settings – declare the temperature,
time and speed from the touch panel respec -
tively.
Automatic programmes – select the appropri -
ate automatic programme, make possible pa -
rameter adjustments.
The selection of the range of a given value can
be made directly on the touch control panel or
by means of the knob (13) after the parameter
has been indicated on the panel. Start the pro -
cess by pressing the icon . Pressing the knob
will also start or stop the process. The white
light of the knob indicates that the process is in
progress.
ATTENTION! If you have declared a temper -
ature greater than 60°C, do not set the speed
greater than “3”. Risk of burns!
Recipes (example) Custom settings Automatic programmes