Salva ST-02, Инструкция по установке и эксплуатации

Страница: 34 / 73

SALVA INDUSTRIAL, S.A
File: Horno Modular 02 (ing) 180711
6-2
Spots and pourings inside and outside the door have to be cleaned with a moistened cloth (soap
and water) and dried up with a clean cloth. Watch out that water does not get into the control
panel and the electrical parts of the oven.
NOTE: If this oven is been used continuously without stop, the internal parts of the oven has to be
cleaned more than once a month.
6 month period maintenance (should be made by the Official Technical Service)
The electrical parts of the oven should be cleaned.
NOTE: Dust and flour could provoke malfunctions of the electrical components of the electrical
control box.
In order to change the lamp when it fuses, proceed as follows :
1- remove the screws (18) that join the inner tray (17) to the inner cover (15), thereby enabling
you to remove the tray and the inner glass panel.
2- in order to replace the inner glass panel, remove the old panel (20
PASTRY DOOR
/16
PIZZA
DOOR
) and position the new one by applying heated silicone along the edge which joins it to the
inner tray (17).
3- in order to replace the outer glass panel (9), remove the nuts and the panel separators (11)
and then replace the panel.
4- Follow the steps outlined in point 1- in reverse in order to reassemble the inner tray (18) on
the inner cover (4).