Salva ST-02, Инструкция по установке и эксплуатации

Страница: 12 / 73

SALVA INDUSTRIAL, S.A
File: Horno Modular 02 (ing) 180711
1-5
Once modules have been piled upon the base and the worktop has been installed, proceed as
follows: (See drawing)
•
Place the corresponding collector on the back part of each deck (4), which is included in the box
termed "MATERIAL DE ENVIO Nº 1 (DESPATCH MATERIAL Nº 1), following the order from the
bottom towards the top, and fitting the top part of a collector to the bottom part of the other, a
general collector for fume extraction is attained.
•
In order to finish off this collector, place another with a cylindrical shape (3), which may be fitted
with a chimney (1) for fume extraction to the outside, ALWAYS BASED on a suction hod (2)
butane water heater type, which is the most efficient system and that which affects cooking least.
•
Then place a closing lid (5) on the bottom part of the collector of the first deck which has been
fitted with a draining pipe to evacuate the water produced by the effect of steam condensation.
•
This draining pipe may be fitted with a rubber or plastic hose (6) up to a water collection vessel,
or better still, directly to the drainage system.