Salus MAG Defender MD22, Инструкция по эксплуатации

Страница: 2 / 20

MD22 INSTRUCTION MANUAL 2
INTRODUCTION
Today, high efficiency boilers offer excellent performance for
heating systems, however this performance can be eroded
significantly if little attention is given to the cleanliness of the
complete central heating system. Historically the majority of
systems suffer from iron oxide contamination, which takes the
form of sludge deposits which are caused by corrosion of the
heating system.
The iron oxide particles vary in size and the sub-micron particles
are present in the system fluid continuously during system
operation. The oxide particles can cause premature failure of
valves and pumps and boiler efficiency is reduced dramatically as
the particles contaminate the boilers heat exchanger, and the
complete system pipework.
The SALUS Mag Defender offers system protection and increased
efficiency, as it has been designed to remove the suspended iron
oxide particles without reducing flow rate through the system.
Installation is simple; isolation valves rotate 360º so a number of
location options can be facilitated.
An added advantage to installers is the bottom mounted valve for
servicing. Once isolated the bottom valve allows the easy
discharge of contaminants. The main body is 500mL, which allows
the installer to add the correct amount of corrosion inhibitor when
the isolation valves are closed.
MAG Defender Manual 013_Layout 1 28/02/2013 15:57 Page 3