Document Reference: ENG-UMAN-000731
Revision: 5.00
Page 22 of 61
Figure 8.3: Location of the Visit Name dropdown menu and setting button
5.
Click on the stimulator serial number that you wish to connect to.
6.
The CPA will connect to the stimulator and retrieve any patient data and programs.
Note: Depending on the amount of data saved on the device this could take several
minutes. Downloading can be cancelled but this is not recommended as any system error
and device usage logs will be missed.
7.
The CPA will display the electrode display window when it has successfully
connected and downloaded data from the stimulator.
Note: When the CPA connects to a stimulator it will attempt to download three log files
from the stimulator. If any logs cannot be downloaded, an error message will be displayed
on the ECAP Measurement and Current rolling plot (see Section 0). To download the logs
manually, such as when download fails, refer to Section 9.6.
8.3
Set stimulator time
1.
Touch the CLS icon
to open the CLS Menu.
2.
Touch Sync Time in the CLS Menu to set the stimulator time to the CI time (if the
time is not already synchronized).
Note: The time error between the CI and stimulator is displayed in brackets.
Note: If out of sync, a red ‘clock’ icon will be displayed in the CLS icon window
and
the time error between CI and stimulator is displayed in brackets in the CLS menu.
Note: Ensure that the time and date on the CI are correct (top left corner of CPA screen,
Figure 8.2). Refer to the CI instructions (see
Section 7.1
for link) to change the time and
date.
Visit Name
dropdown menu
Connect to
Implant button
