Document Reference: ENG-UMAN-000731
Revision: 5.00
Page 48 of 61
Patient Zone
Set the region or zone for the patient
9.9
Error Display
When errors occur, they will be displayed over the ECAP Measurement and Current rolling
plot (Figure 9.3). A count of the errors from the error log are also displayed to the right of
the Stop button (see Table 9.1 for more information regarding the symbols).
For more information regarding how the stimulator responds to errors see Section 10.
Figure 9.3: Error display and error counts on the CPA screen.
Table 9.1: Error count symbol information. Note that a ‘?’ means log was not
downloaded or that an error occurred during download, stop stimulation and download
the log again.
Symbol
Description
ERT Clipping count
Clock Error count
Magnet Reed Switch count
Current At Max count
If present then Usage Log did not download or there was an error
If present then Long Term Log did not download or there was an error
9.9.1
Clipping Errors
Clipping errors during stimulation are displayed on the ECAP display (Figure 9.4)
Error
display
Error
count
s
Clipping
indicator
