Salton multipot HC1351, Инструкция пользователя

Страница: 6 / 22

6
BEFORE FIRST USE
1. Disassemble the Air Wave Health Cooker by following the directions
in the ‘How to Assemble/Disassemble’ section.
2. Remove any manufacturing residue left on the removable parts
by washing in warm soapy water. These include the Transparent
Cover, Base Bowl, Rotating Drum, Rotisserie Kit, Tongs, High and
Low Cooking Racks and Rack Handle. Dry thoroughly. NEVER
IMMERSE THE MAIN HOUSING OR CONTROL PANEL IN WATER
OR ANY OTHER LIQUID.
3. Reassemble the Cooker by following the directions in the ‘How to
Assemble/Disassemble’ section.
4. Close the Cover and plug into the wall outlet.
5. Preheat the Cooker without food, for 10 minutes to burn off any
manufacturing residue. This is for the fi rst time only. Do not preheat
the oven for regular use.
6. Set the Cooker to a cooking time of 10 minutes by pressing the
Function Button once then press the ‘+’ button until 10 minutes is
displayed in the LED readout.
7. Set the temperature by pressing the Temperature Button to 400°F
(205°C).
8. Press the Start/Cancel Button.
9. The Cooker may release a slight burning smell or light smoke. This
will disappear quickly and will only happen the fi rst time the oven is
used.
10. When the 10 minutes has elapsed allow the Cooker to cool down for
10 minutes before opening the Cover.
HOW TO ASSEMBLE / DISASSEMBLE
How to Assemble the Oven
1. Place the Base Bowl on the Main Housing so that the 2 round legs are
at the front of the unit and the Micro Switch is at the back.
2. Re-assemble the Transparent Cover
to the main housing by aligning the
4 locking tabs on the Cover with the
raised areas on the main housing.
NOTE: The Drive Shaft Hole in the
Cover should be at approximately
the 4 o’clock position.
Salton_HC1351_InstructionBooklet_E.indd 6 Salton_HC1351_InstructionBooklet_E.indd 6 13-05-15 12:27 PM 13-05-15 12:27 PM