to scroll through the digits or press and release the Buttons to advance
one digit at a time. (Note the AM and PM setting)
3. The word ‘Clock’ will disappear from the Display Window 15 seconds
after the clock has been set.
Setting the Delay Start time
1. Follow the instructions in the HOW TO USE section for either ‘Grinding
Beans and Brewing Coffee’ #1 – 11 or ‘Brewing Coffee with
Pre-ground Beans’ #1 - 10.
2. Follow the instructions for ’Setting the Current Time’.
3. Press the Program button TWICE. The word ‘Timer’ will be shown in the
Display Window to indicate that you are in the Program Time setting
mode. Press the Hour Button then the MIN Button to set the time
for the Coffee Maker to start.
notE:
Pay attention to the AM
and PM setting.
4. When the desired time is set, press the ON/OFF Button TWICE.
The green indicator light will illuminate and the word ‘Timer’
will disappear from the Display Window.
5. When the preset time is reached the green indicator light will go out and
the red indicator will be illuminated and the coffee maker will start to
brew.
6. If you want to cancel the preset program, press the ON/OFF Button twice
and the Coffee Maker will start the grind and/or brew cycle immediately.
‘PAUSE & SERVE’ FEAtURE
The ‘Pause & Serve’ feature allows you to pour a cup of coffee before
the brew cycle has finished. Remove the Carafe slowly to temporarily
stop the flow of coffee. Quickly pour a cup of coffee and reposition
the Carafe securely on the Warming Plate.
notE: Do not
remove
the Carafe for longer than 30 seconds.
IMPoRtAnt notES:
1. Your Coffee Maker is equipped with a Safety Interlock system.
If the Coffee Maker Cover is open or the Grinder and Grinder Cover
is not in place, the Coffee Maker will not operate and will ‘beep’
continuously until the missing parts are installed and you close
the Cover. The display will show OP1 if the Coffee Maker Cover
is open or OP2 if the Grinder Cover is not in place.
8
SAL7-567 Booklet Salton Coffee M8 8
09/07/07 16:59:22
