BEFoRE FIRSt USE
Wash the Carafe, Carafe Lid, Filter Basket, Permanent Filter, Filter Basket
Cover, Grinder and Grinder Cover in warm soapy water. Rinse thoroughly
and dry. Wipe the Main Housing with a soft damp cloth.
Do not
immerse
Main Housing in water or any other liquid.
Prior to brewing coffee for the first time run the machine with water only.
Follow the directions in the HOW TO USE ‘Brewing Coffee with Pre-Ground
Beans’ section omitting the coffee and Permanent Coffee Filter.
HoW to USE
Grinding Beans & Brewing Coffee
notE:
The current time does not have to be set if you are not using the
Delay Start feature.
1. Open the Coffee Maker Cover by gently pushing the Lid Release
towards the back of the unit.
notE:
If the Coffee Maker is plugged in,
it will ‘beep’ as long as the Cover is left open or the Grinder Cover is
not installed.
2. Remove the Grinder Cover by turning counterclockwise
and lifting off. Lift up and remove the Grinder and
add the required amount of coffee beans for the
number of cups of coffee. (See the markings on
the inside of the Grinder See Ill. 2.)
notE:
- The Grinder must be removed before filling
with coffee beans.
-
Do not
exceed 6 oz. (170 g) of coffee
beans.
Do not
overfill the Grinder.
3. Place the Grinder back into
the Coffee maker. The
Connector must be locked into
the Grinder Motor Shaft. (Ill. 3)
otherwise the coffee beans will
not be ground.
4. Replace the Grinder Cover and turn clockwise
so that the Grinder Cover Tab is pointed to
the ‘LOCK’ (symbol) position (See Ill. 1).
5. Move the Grinder Door Tab to the lock position
( ) (furthermost left position).
5
Ill. 2
Ill. 3
Grinder
Motor Shaft
Connector
(on bottom
of Grinder)
Ill. 4
SAL7-567 Booklet Salton Coffee M5 5
09/07/07 16:59:21
