OWNER’S MANUAL V.102020.1 ENGLISH
XT-524 BIKE
This manual can be downloaded from
www.salter.es
● Set user: Start the movement to ac vate the screen, U0 will appear, press +/- to select from U0~U4,
and press ENTER to confirm, then could set sex, age, height and weight, press ENTER to confirm.
● Set sex: Press +/- to select sex, then press ENTER to confirm
● Set age: Press +/- to select age 10-25-99, then press ENTER to confirm
● Set height: Press +/- to select height 100-160-200cm, then press ENTER to confirm
● Set weight: Press +/- to select weight 20-50-150kg, then press ENTER to confirm
3.
Select function (MANUAL, PROGRAM, FITNESS, PERSONAL,HRC)
Enter function selection window after user setting, press +/- or MODE to select function, then press
ENTER to confirm. Again press +/- to set all the function value (TIME
、
DIST
、
CAL
、
PULSE), and
then press START to start exercise, during which could press +/- and hand-bar +/- to adjust
resistance.
If select Manual function, and press ENTER to confirm, then press +/- to set value. When set all
function value (TIME
、
DIST
、
CAL
、
PULSE), press START to start exercise, during which could
press+/- and hand-bar resi/- to adjust resistance.
If select PROGRAM function, and press ENTER to confirm, then press +/- to set value. When set all
function value (TIME
、
DIST
、
CAL
、
PULSE), press START to start exercise, during which could press
+/- and hand-bar resi/- to adjust resistance.
If select FITNESS function, and press ENTER to confirm, other setting not able to set, and press START
to start exercise, during which resistance and time are not able to adjust because it’s a fitness test.
If select other function (PERSONAL, HRC), same as Manual/PROGRAM as above.
Function summary
1.
Could pre-set user U1-U4 personal information (sex/age/height/weight) User input the real
information (sex/age/height/weight) for the console’s basis for other function calculation.
2.
Could select MANUAL/PROGRAMS/FITNESS/ PERSONAL/H.R.C User could select different control
mode to exercise, please refer to the specification for each major control mode below.
MANUAL –enter this mode to set 1~24 resistance level in the matrix, and user could directly set each
exercise value TIME/DISTANCE/CALORIES/PULSE, then press “START/STOP” to start/stop.
PROGRAM- console provides 12 different resistance graph to simulate 12 different mountain resistance
situation, to let the user challenge him/herself. Use +/- to select the proper mountain resistance graph,
and the selected graph would blink, press ENTER to confirm.
FITNESS- Select “FITNESS”, and ENTER to confirm, and time set to 12 min, resistance 6, and could press
START to start. When time count-down to 0, the console display the corresponding level F1-F5 based
on the exercise.