OWNER’S MANUAL V072023 ENGLISH
XT-524 BIKE
This manual can be downloaded on
www.salter.es
STEP 2 Remove the packaging aids
First remove the two screws (B) and the board (A) with the Allen key provided and throw them away (the
subsequent installation steps are not used).
STEP 3
Install the rear bottom tube assembly. (This step requires 2 people)
After unpacking, the packing block (C) is placed under the machine table to facilitate the installation of the
rear bottom pipe assembly. (As shown below: Another person can hold the front end of the machine to
avoid tilting the machine).
Find the rear bottom tube assembly (2). Remove the two screws (16) that are pre-locked on the main
frame (1) and put them on the side to be used in the rear installation.
Use 2 removed bolts (16) through the hole in the rear bottom tube and lock it on the main frame (1) The
corresponding sheet metal. Remove the packing material (C) under the machine and throw it away.
